PC Builder
Start with any part, in any order. Each choice narrows the rest to parts that fit: the CPU socket must match the motherboard, memory must match its type (DDR4 or DDR5) and slot count, the board must fit the case, the cooler must suit the socket and clear the case, and the power supply must cover peak draw with headroom.
Choose from 126 processors, 138 graphics cards and 315 components. Once a processor and graphics card are in, you get an estimated PCG Score and estimated FPS in 57 popular games at 1080p and 1440p. Share any build with one link.
Processor
Runs game logic, physics and AI; sets the frame-rate ceiling in CPU-heavy games.
6–8 fast cores. X3D chips lead in games. Socket decides your motherboard.
Suggested for this build
Motherboard
Connects everything: sets socket, memory type, Wi-Fi, M.2 slots and board size.
Match the CPU socket, pick DDR5 on new platforms, Wi-Fi 6E/7 if you won't use a cable.
Suggested for this build
Memory
Holds the game and Windows while you play; too little causes stutter.
32 GB in two sticks. DDR5-6000 CL30 is the sweet spot on AM5.
Suggested for this build
Graphics card
Renders every frame. The biggest factor for FPS, resolution and settings.
12–16 GB VRAM for 1440p. Balance it with your processor.
Suggested for this build
Storage
Stores your game library; affects load times and texture streaming.
NVMe PCIe 4.0, 2 TB+. Add drives up to the board's M.2 slots.
Suggested for this build
CPU cooler
Keeps the processor cool and quiet under load.
Tower air coolers are quiet and cheap; 280–360 mm liquid for 150 W+ chips. Check case clearance.
Suggested for this build
Power supply
Delivers stable power to every part, including transient spikes.
About 35% headroom over peak load, 80+ Gold, ATX 3.x with 12V-2x6 for new GPUs.
Suggested for this build
Case
Houses the build and sets airflow, size and style.
Mesh front for airflow; must take your board size and cooler height.
Suggested for this build
Case fans
Move air through the case for cooler parts and lower noise.
Two intake at the front, one exhaust at the back is a good starting point.
Suggested for this build