Mount & Blade II: Bannerlord on GeForce GTX 1050
Yes, at lower settings. The GeForce GTX 1050 meets Mount & Blade II: Bannerlord's minimum spec but not the recommended one. We estimate ~30 fps at 1080p high (range 24–36, medium confidence, ±20%), GPU-limited. 60 fps at 1080p is out of reach. Its 2 GB of video memory is below the 3 GB the game recommends. The cheapest current card for 60 fps at 1080p high is the GeForce RTX 3050 6GB (~67 fps). Model estimate, not measured; data updated 2026-09-24.
Estimated FPS by preset
| Preset | 1080p | 1440p | 4K |
|---|---|---|---|
| low | 51 | 36 | 21 |
| medium | 39 | 27 | 16 |
| high | 30 | 21 | 13 |
| ultra | 24 | 17 | 10 |
Estimated FPS from our model (v0), based on the game's published requirements and relative GPU/CPU performance. Not measured. Real results vary with drivers, patches, and scenes. Values above 300 fps show as 300+. Data updated 2026-09-24.
Best settings
- 60 fps at 1080p: not reachable
- 60 fps at 1440p: not reachable
- 144 fps at 1080p: not reachable
This GeForce card has no tensor cores, so DLSS is not available. Use FSR or XeSS in quality mode before dropping the preset.
What limits performance
- Estimates above: GPU-limited, assuming a processor fast enough not to hold the GeForce GTX 1050 back.
- Processor needed for ~30 fps: Core i3-9100F or faster (slowest current desktop CPU our model expects to keep up).
- With the recommended CPU (Core i5-9600K): still GPU-limited at 1080p high, ~30 fps.
Video memory
- GeForce GTX 1050: 2 GB
- Minimum spec: 2 GB (+0 GB headroom)
- Recommended spec: 3 GB (1 GB short)
Cheapest upgrade for each target
1080p, 60 fps, High
GeForce RTX 3050 6GB
~67 fps vs 30 now (est.)
+123% GPU performance
1440p, 60 fps, High
GeForce RTX 3050 8GB
~60 fps vs 21 now (est.)
+185% GPU performance
4K, 60 fps, High
Radeon RX 7600 XT
~60 fps vs 13 now (est.)
+377% GPU performance
Slowest current desktop card (2020+) that reaches each target in Mount & Blade II: Bannerlord; usually the cheapest.
Mount & Blade II: Bannerlord on popular graphics cards (high preset)
| Graphics card | 1080p | 1440p | vs GeForce GTX 1050 |
|---|---|---|---|
| GeForce GTX 1050 | 30 | 21 | — |
| GeForce GTX 1650 | 46 | 32 | +54% |
| GeForce GTX 1060 6GB | 65 | 45 | +115% |
| GeForce RTX 2060 6GB | 97 | 68 | +223% |
| Radeon RX 6600 | 106 | 74 | +254% |
| GeForce RTX 3060 12GB | 115 | 81 | +285% |
| GeForce RTX 4060 Laptop GPU | 120 | 84 | +300% |
| Radeon RX 7600 | 134 | 94 | +346% |
| GeForce RTX 4060 | 136 | 95 | +354% |
| GeForce RTX 3070 | 159 | 111 | +431% |
| GeForce RTX 4070 | 201 | 141 | +569% |
| Radeon RX 7800 XT | 224 | 157 | +646% |
| GeForce RTX 5070 | 231 | 162 | +669% |
| Radeon RX 9070 XT | 300 | 210 | +900% |
| GeForce RTX 4080 | 300+ | 218 | +938% |
| GeForce RTX 5090 | 300+ | 300+ | +1554% |
Mount & Blade II: Bannerlord on other hardware
- GeForce GTX 1650
- GeForce GTX 1060 6GB
- GeForce RTX 2060 6GB
- Radeon RX 6600
- GeForce RTX 3060 12GB
- GeForce RTX 4060 Laptop GPU
- Radeon RX 7600
- GeForce RTX 4060
- GeForce RTX 3070
- GeForce RTX 4070
- Radeon RX 7800 XT
- GeForce RTX 5070
- Radeon RX 9070 XT
- GeForce RTX 4080
- GeForce RTX 5090
- Steam Deck OLED
- ROG Ally X
- ROG Xbox Ally X
- Legion Go 2
- MSI Claw 8 AI+