SILENT HILL 2 on MSI Claw 8 EX AI+
No. The MSI Claw 8 EX AI+ is below SILENT HILL 2's minimum spec (GeForce GTX 1070 Ti). At its native 1920×1200 we estimate ~36 fps on the medium preset (range 28–43, medium confidence, ±20%). 60 fps is out of reach; 40 fps works on low. Model estimate, not measured; data updated 2026-09-24.
Estimated FPS at native 1920×1200
| Preset | Native 1920×1200 | Range | Rendered at 1280×800 |
|---|---|---|---|
| low | 47 | 37–56 | 77 |
| medium | 36 | 28–43 | 59 |
| high | 28 | 22–34 | 46 |
| ultra | 22 | 18–27 | 37 |
Estimated FPS from our model (v0), based on the game's published requirements and relative GPU/CPU performance. Not measured. Real results vary with drivers, patches, and scenes. Values above 300 fps show as 300+. Data updated 2026-09-24.
Presets for 30 / 40 / 60 fps
- 30 fps at 1920×1200: medium preset
- 40 fps at 1920×1200: low preset
- 60 fps at 1920×1200: not reachable
- 40 fps rendered at 1280×800: high preset
- 60 fps rendered at 1280×800: low preset
Intel Arc graphics: use XeSS (runs best on Arc) or FSR in quality or balanced mode before dropping the preset. DLSS is not available.
Frame cap and power
- Screen: 1920×1200, 120 Hz, 80 Wh battery.
- Even frame caps for 120 Hz: 30, 40, 60, 120 fps. The low end of our range (28 fps) is under 30 fps, so expect drops below any cap.
- TDP: not measured yet. We don't publish wattage advice until we have measured runs.
Steam Deck rating
Valve rates SILENT HILL 2 Unsupported on Steam Deck (tested on Steam Deck, not on the MSI Claw 8 EX AI+).
SILENT HILL 2 on other handhelds (medium preset, native resolution)
| Handheld | Screen | FPS at native | FPS at 1280×800 | Verdict |
|---|---|---|---|---|
| MSI Claw 8 EX AI+ | 1920×1200 | 36 | 59 | Below minimum |
| ROG Xbox Ally X | 1920×1080 | 28 | 43 | Below minimum |
| ROG Xbox Ally X20 | 1920×1080 | 28 | 43 | Below minimum |
| Legion Go 2 | 1920×1200 | 25 | 42 | Below minimum |
| MSI Claw 8 AI+ | 1920×1200 | 25 | 42 | Below minimum |
| MSI Claw A8 | 1920×1200 | 25 | 42 | Below minimum |
| MSI Claw 7 AI+ | 1920×1080 | 26 | 40 | Below minimum |
| ROG Ally X | 1920×1080 | 24 | 37 | Below minimum |
| Legion Go | 2560×1600 | 14 | 34 | Below minimum |
| ROG Ally (Ryzen Z1 Extreme) | 1920×1080 | 22 | 34 | Below minimum |
| Legion Go S (Ryzen Z1 Extreme) | 1920×1200 | 21 | 34 | Below minimum |
| Legion Go 2 (Ryzen Z2) | 1920×1200 | 21 | 34 | Below minimum |
| Steam Deck OLED | 1280×800 | 29 | 29 | Unsupported on Steam Deck |
| Steam Deck LCD | 1280×800 | 28 | 28 | Unsupported on Steam Deck |
| ROG Xbox Ally | 1920×1080 | 17 | 26 | Below minimum |
| Legion Go S | 1920×1200 | 16 | 26 | Below minimum |
| MSI Claw A1M | 1920×1080 | 17 | 26 | Below minimum |
| ROG Ally (Ryzen Z1) | 1920×1080 | 13 | 20 | Below minimum |
Native = each device's own screen resolution; 1280×800 compares GPUs at the same render resolution. A faster handheld is the upgrade path here; desktop cards don't apply.
SILENT HILL 2 on other hardware
- GeForce GTX 1650
- GeForce GTX 1060 6GB
- GeForce RTX 2060 6GB
- Radeon RX 6600
- GeForce RTX 3060 12GB
- GeForce RTX 4060 Laptop GPU
- Radeon RX 7600
- GeForce RTX 4060
- GeForce RTX 3070
- GeForce RTX 4070
- Radeon RX 7800 XT
- GeForce RTX 5070
- Radeon RX 9070 XT
- GeForce RTX 4080
- GeForce RTX 5090
- Steam Deck OLED
- ROG Ally X
- ROG Xbox Ally X
- Legion Go 2
- MSI Claw 8 AI+
More about the MSI Claw 8 EX AI+
Specs and every game it runs →SILENT HILL 2 requirements and FPS on popular hardware →